AGET
Exhauster and After-Filter Combinations
Aget FT 24, FT 40, FT 140, FT 64 and FT164 After-Filters are available with Aget Exhausters. The Aget Exhauster is a blower which generates a powerful air force, drawing contaminated air through the fan and expelling it into the After-Filter. Dust particles as small as 0.3 microns are removed and clean air is returned to the work area, where permitted. These combinations are for use where fine dust particles must be removed in medium to heavy volume and when few coarse particles are present, so the Aget Cyclone Separator is not needed.
After-Filters with "Push-Thru" Exhausters
FT40 and FT140 with hopper (Enclosed with Exhauster)
FT40 and FT140 (with Exhauster)
FT40-D1 and FT140-D1 (Enclosed with Exhauster)
FT40-D1 and FT140-D1 (with Exhauster)
Additional Models Available (Request Bulletin 737)
AFTER-FILTERS WITH EXHAUSTERS
MODEL
L
W
H
FILTER
..FT40
50-1/2
32-1/2
157
383
..FT40-H
50-1/2
32-1/2
190
383
..FT40-D1
52
52
222
383
..FT64
54-1/2
54-1/2
158
612
..FT64-H
54-1/2
54-1/2
205
612
..FT64-D1
65
56
236
612
Exhausters
Aget Exhausters are engineered to move quantities of air for ventilation, dust removal, circulation, fume emission and ecological improvement of in-plant work areas.

The wide range in Exhauster sizes and capacities makes them adaptable to a broad variety of conditions.
EXHAUSTERS
MODEL
HP
CFM RANGE
INLET
5E20
1/2
to 600
4"
8E50
3/4
to 800
5"
11E51
2
to 1200
6"
20E31
5
to 2600
7"
30E51
10
to 3200
10"
Direct Drive Exhauster
Go Back To Top
Return Home