AGET
Features and Specifications
MISTKOP's proven design couples simplicity with efficiency. No spinning filter to waste horse-power or cause vibrations due to unbalanced filters. Mist and contaminants are captured at the source rather than after they are dispersed as with unducted or electronic units. Easily replaced, low cost filters. Collected fluid drains to your process or container. Usually hung near the source, but all models are available "inverted" such as VC-51 for direct or floor mounting. Secondary filters can be added for smoke.
• Easy to install

• Increase production efficiency

• Low initial cost

• Reclaim valuable lubricants

• No rotating filters to get out of balance

• Non-electronic
View Model Selections
MISTKOP with Exhaust Shell vents filtered fumes, gases, or heat to the outside. Available for all models, standard or inverted. Can also be supplied with HEPA filters for efficiency up to 99.97% at 0.3 micron.
Secondary filters that trap smoke and sub-micron particles.
EXHAUST SHELL For Exterior Discharge
HEPA FILTER

A second stage HEPA filter can be joined to any size Mistkop with the special plenum shown above.
FM-1

Secondary filter eliminates heavy smoke as well as super fine mists in the sub-micron range.
To exhaust fumes, gases or other contaminated air to the outside (or any controlled area), a solid exhaust shell is used.
Go Back to Top
Return Home