After-Filters and FILTERKOP
"Baghouse" Collectors
For filtering fine dust that may pass through cyclone dust collectors or other primary dust collection device. After Filters permit recirculation of cleaned air where allowed for non-toxic applications. They are available open for indoors, or enclosed for outdoor locations. Motor powered filter shakers are standard on the FT64, FT164, FT88, and FT188 series units, and optional to replace the standard manual shakers on all other sizes.
Cotton sateen filter tubes are standard, and optional Napped Cotton Sateen filters are available for fine dust collection applications, with efficiencies down to 0.3 microns possible. Other optional fabrics are available. Other options: automatic shaker control timers, pressure relief panels, explosion proof shaker features, and HEPA filter adapters or HEPA modules for "polishing" discharge air. Larger baghouses are shown below.
FT40-D1 with Exhauster
FT24-D1
FT40
FT24
(Request Bulletin 731)
FT64-D1 Enclosed with Exhauster
FT64
FT64 Enclosed

FT After Filter Series – Models and Specifications
• All FT24 Models include hopper bottom.

• All sizes except FT24 have cleanout doors on both ends of dust storage bin as standard. Removable dust bin drawers are optional.

• Manual Shakers are standard on all FT24, FT25, and FT40 Series and Motorized Shakers are optional. Motorized Shakers are standard on all FT64 and FT88 Series. Automatic, solid state shaker control timers are also optional.

• Special modifications available on hopper & drum "D1" Models to reduce height by 13.5" (except FT24)

• Weather-tight enclosure construction available for all dust collector after filter units.

• Complete dust collector units including all FT Series units with direct mounted exhausters are available in two styles, as pull through dust collectors or push-through dust collection systems (see menu). Larger Filterkop Series baghouse dust collectors with integral fans or exhausters are also available.

• Stainless steel construction is available for all FT Series After Filters.

 
FILTERKOP
For Removing Large Volumes of Very Fine Dust
A Filterkop dust collector will clear the air of very fine dusts, and keep it that way. Utilizing a permanent fabric filter system (baghouse), the Filterkop removes "fines" as small as 0.3 microns from the airstream, and returns cleaned air back to the workplace, or to vent as desired. The system requires no cartridge filters, or cartridge replacement expense.
How A Filterkop Operates
Dust laden air enters the inlet duct, as shown, and circulates upward and through the cloth filter tubes. Dust is collected by the tubes, and clean air exits via the tube walls and through the baghouse outlet to the outside atmosphere, or back to the plant interior, where permitted. A motorized shaker removes dust from the tubes which falls into the hopper bottom, and into one or more collection drums.
Request Bulletin 730
NOTE: Filterkops are also designed for use with an Aget DUSTKOP or Exhauster which collect contaminated air from plant interiors or process equipment and forces it into the Filterkop.

FH58 FILTERKOP Series Filter Units – Models and Specifications
• Models with the "D" suffix (FH58-1D, 2D, etc.) have drums under each hopper.

• Model without "D" suffix have 12 x 24 slide gate on each hopper with 25 1/2" clearance.

• Models available with hopper gates but "D" leg length for extra clearance under hoppers (54 1/2").

• Special longer and heavier leg lengths available for 72" or 96" clearance for truck or dumpsters.

• Direct mounting arrangements available for either push-through or pull-through Aget Exhausters.

• Stainless steel construction is available for all Filterkop models.

• All Filterkop models are shipped knocked down (KD). FH58-1 or 1D can be shipped assembled
Various Baghouse Models
Go Back to Top
Return Home
AGET