AGET
CHIP-MIST COLLECTORS
This combination Chip-Mist Collector is designed for use in machining, drilling, boring, screw machines, and grinding operations where metal dust, chips and solid particles mix with coolants, and where a Mist Collector alone can not operate efficiently.

In operation, mist mixed with chips, or moisture laden particles are drawn into the Dustkop cyclone where solids are separated from the airstream and deposited into a 55 gallon drum. From the Dustkop, secondary air is forced upward into the Mistkop filter where remaining moisture is separated from the air, and residual fluid is carried by a hose or tube into the sump of the equipment.

These combination units are designed for operations where oily chips, wet dust, and other pollutants are generated, and can contaminate shop air.
Model 20NM31-D1
Chipmist units are available with side mounted Mistkop filters, as shown, for servicing multiple machine sources, and also where low ceiling heights prevent use of vertical model.
Specifications
MODEL
HP
CFM
INLET SIZES
H
INLET HT.
H
W
11NM51-D1
1-1/2
to 900
6"
9'0"
62"
41"
30"
20NM31-D1
3
to 1500
7"
10'6"
77"
41"
30"
30NM51-D1
7-1/2
to 2400
8", 10"
12'0"
96"
49"
33"
Go back to Top
Return Home