Aget Filter Type Dust Collectors
For very fine dust applications, where a cyclone may not be effective, two styles or configurations of filter type dust collectors with integral exhausters are available: the Exhauster and After-Filter Combination and the After-Filter with Pull-Through Exhausters.
After-Filters with Pull-Through Exhausters
Our 10 after-filter and exhauster combinations are designed to capture dust as small as .3 microns using cotton sateen cloth filter tubes. Equipped with top mounted exhausters that are direct flange mounted, they pull contaminated air into the filter tubes, This configuration protects the fan from dust and foreign materials, making them preferred for abrasive applications. They are also completely weatherproofed for outdoor installation when equipped with a vent cover. Please inquire by phone or by our This e-mail address is being protected from spambots. You need JavaScript enabled to view it. .
All Aget pull-through exhauster and after-filter combinations are shipped completely assembled to save installation time and costs. Larger sizes than those shown are available in both configurations.
 FT40S SERIES-D1 |
 FT64S SERIES |
 FT64S SERIES-D1 |
 FT24S SERIES |
 FT24S SERIES-D1 |
 FT40S SERIES |
| FT24 Models | FT40 Models | FT64 Models |
SPECIFICATIONS |
| FT24S21 2 HP, FT24S21-D1 TEFC MOTOR 10" Inlet |
FT40S21 2 HP, FT40S21-D1 TEFC MOTOR 6", 7" Inlet |
FT64S21 2 HP, FT64S21-D1 TEFC MOTOR FT64S21-2HD2 8" Inlet |
2 HP, TEFC, 3450 RPM Motor 600 CFM at 6" pressure to 1300 CFM at 1.4" W.G., 6" outlet |
| FT24S31 3HP, FT24S31-D1 TEFC MOTOR 10" Inlet | 3 HP, TEFC, 3450 RPM Motor 800 CFM at 6" pressure to 1800 CFM at 2" W.G., 9" outlet |
FT64S31 3 HP, FT64S31-D1 TEFC MOTOR FT64S31-2HD2 8", 10" Inlet |
3 HP, TEFC, 3450 RPM Motor 800 CFM at 6" pressure to 1800 CFM at 2" W.G., 9" outlet |
| FT24S51 5 HP, FT24S51-D1 TEFC MOTOR 10" Inlet | 5 HP, TEFC, 3450 RPM Motor 1000 CFM at 7.6" pressure to 2350 CFM at 1.6" W.G., 10" outlet |
FT64S51 5 HP, FT64S51-D1 TEFC MOTOR FT64S51-2HD2 8", 10", 12" Inlet |
5 HP, TEFC, 3450 RPM Motor 1000 CFM at 7.6" pressure to 2350 CFM at 1.6" W.G., 10" outlet |
| 7.5 HP, TEFC, 3450 RPM Motor 1200 CFM at 10.2" pressure to 3100 CFM at 3" W.G., 12" outlet |
FT64S71 7-1/2 HP, FT64S71-D1 TEFC MOTOR FT64S71-2HD2 10", 12", 13" Inlet |
7.5 HP, TEFC, 3450 RPM Motor 1200 CFM at 10.2" pressure to 3100 CFM at 3" W.G., 12" outlet |
|
| 10 HP, TEFC, 3450 RPM Motor 2000 CFM at 10.3" pressure to 4900 CFM at 2.6" W.G., 15" outlet |
FT64S101 10 HP, FT64S101-D1 TEFC MOTOR FT64S101-2HD2 10", 12", 13" Inlet |
10 HP, TEFC, 3450 RPM Motor 2000 CFM at 10.3" pressure to 4900 CFM at 2.6" W.G., 15" outlet |
After-Filter and Exhauster Combinations
For applications that produce a fine dust or powder in medium or heavy volumes, an Aget After-Filter with an attached industrial exhauster can be the ideal solution. Exhausters create a powerful air force that pushes contaminated air through a non-sparking fan and into an after-filter or baghouse filter. The air can then be vented outdoors or returned to the work area, where appropriate.
These products are perfect for indoor use where a filter enclosure is not required and air is to be recirculated within the work space. They can, however, be equipped with enclosures for outdoor locations. Separate exhausters are also available without an attached after-filter for ventilation, circulation, fume emission or improvement of in-plant work environment.
|
FT40 (with Exhauster) |
FT40 with hopper (Enclosed with Exhauster) |
FT40-D1 (with Exhauster) |
FT40-D1 (Enclosed with Exhauster) |
| AFTER-FILTERS WITH EXHAUSTERS | ||||
| MODEL | L | W | H | FILTER |
|
FT25
|
32-1/2 | 32-1/2 | 157 | 239 |
|
FT40
|
50-1/2 | 32-1/2 | 157 | 383 |
|
FT40-H
|
50-1/2 | 32-1/2 | 190 | 383 |
|
FT40-D1
|
52 | 44 | 222 | 383 |
|
FT64
|
54-1/2 | 54-1/2 | 158 | 612 |
|
FT64-H
|
54-1/2 | 54-1/2 | 205 | 612 |
|
FT64-D1
|
65 | 56 | 236 | 612 |
|
FT88
|
72-1/2 | 54-1/2 | 158 | 843 |
|
FT88-D1
|
74-1/4 | 65 | 236 | 843 |
Contact us for more information on our exhausters and after-filters.
